All Products
Floor Installed Renewable Energy EV Charging Station Install With Multiple Charging Modes Humidity Tolerance
| Noise: | ≤65dB |
|---|---|
| Networking Methods: | Ethernet/4G/OCPP (optional) |
| Charging Mode: | Automatic Charging, Based On Time, Based On Battery Capacity, And Based On Payment Amount. |
Commercial EV Charging Station Fast With Secure Payment Methods Adjustable Output Voltage
| Usage Environment: | Indoor Or Outdoor |
|---|---|
| Output Voltage Range: | DC200-1000V Continuously Adjustable |
| Insulation Resistance: | ≥20MΩ |
Ethernet 4G EV Charging Station Floor Installation OCPP Networking Electric Energy Level 2 3
| Noise: | ≤65dB |
|---|---|
| Input Voltage: | AC380V±20% |
| Installation Method: | Floor Installation |
Floor Standing Ev Power Charging Station Home With Adjustable DC200-1000V Output And Protective Functions
| Protective Function: | Short Circuit, Over Temperature, Over Current, Leakage, Over And Under Voltage, Etc. |
|---|---|
| Output Voltage Range: | DC200-1000V Continuously Adjustable |
| Display Method: | 7-inch Touch Screen Display |
15 Hp 25 Hp Variable Frequency Drive 3 Phase Induction Motor Multi Stage Speed Settings S Curve Acceleration
| Torque Response: | ≤ 5ms, In Vector Control Mode |
|---|---|
| Speed Stability: | OLVC: 0.2%; CLVC: 0.1% |
| Input Power Frequency: | (50Hz/60Hz)±5% |
Solar Energy Battery Storage DC Charger ESS EV Car Charging Station Portable
| Battery Capacity: | 200kWh |
|---|---|
| EV Charging Point: | Max 4 Point With 2 Dispensers |
| HMI: | 7"TFT Touch Screen, 5 LED, E-STOP |
600Hz Frequency VFD Inverter For Crane Drive Induction Motor Variable Frequency Drive
| Relay Output: | 1-channel Form C Contact, NO+NC |
|---|---|
| Analog Input Terminal: | AI1、AI2：0V～10V/ 0 (4)mA～20mA |
| Torque Boost: | 0.0%-30.0% |
Crane Variable Frequency Drive With Anti Shake Function For Accurate Load Control
| Anti Shake Function: | Prevent Accidents Caused By Significant Swinging Of The Load During Acceleration Or Deceleration |
|---|---|
| Acceleration And Deceleration Curve: | Straight Line, S-curve |
| Input Power Frequency: | (50Hz/60Hz)±5% |
HV610 Crane VFD Frequency Converter Variable Frequency Drive
| Input Voltage: | 380V（-15%）～480V（+10%） Three Phase |
|---|---|
| Output Frequency: | 0～600Hz |
| Communication Interface: | Modbus RTU(Standard Configuration)；Profibus-DP、Profinet IO、CANopen、Modbus TCP/IP、Ethercat、EtherNet/IP (Optional) |
Three Phase Variable Frequency Drive For Crane 380V-480V
| Analog Input Terminal: | AI1、AI2：0V～10V/ 0 (4)mA～20mA |
|---|---|
| Control Mode: | V/F, OLVC (open Loop Vector Control), CLVC (closed Loop Vector Control) |
| Torque Boost: | 0.0%-30.0% |